Reflective Tape For Bollards
 | Reflective Tape For Bollards
|
Product Description
Detectable Tech Company is a manufacturer of reflective tape for bollards used on parking posts, warehouse protection columns, road separation bollards, metal posts, PVC posts, and guardrail posts. The tape is made for curved surface wrapping, narrow strip slitting, strong adhesion, and clearer nighttime recognition in areas where vehicles, forklifts, and pedestrians pass close to fixed posts. It is built for industrial post visibility, not craft decals, cycling stickers, clothing trim, or flat traffic sign faces.
Product Photos
Technical Data Sheet
Item | Typical Value |
Product Type | Reflective tape for bollards and posts |
Reflective Film | PET or PVC reflective film |
Reflective Structure | Glass bead or microprismatic option |
Adhesive Type | Acrylic pressure-sensitive adhesive |
Standard Width | 25 mm, 50 mm, 75 mm, 100 mm |
Custom Slitting Width | 10 mm to 300 mm |
Slitting Tolerance | +/- 0.5 mm for common narrow rolls |
Roll Length | 25 m, 45.7 m, 50 m |
Film Thickness | 120 um to 180 um typical |
Adhesive Thickness | 30 um to 50 um typical |
Recommended Surface | Clean metal, PVC, HDPE sleeve, painted post |
Application Temperature | 10 C to 35 C recommended |
Service Temperature | -20 C to 70 C typical |
Peel Adhesion | About 12 N/25 mm on clean stainless steel after 24 hours |
Outdoor Durability | 1 to 3 years depending on film grade and exposure |
Bend Suitability | Suitable for common bollard and post wrapping |
Edge Lifting Check | No obvious edge lifting after 72 hours on clean painted metal sample |
Surface Preparation | Dry, clean, oil-free, dust-free surface required |
Color Options | White, yellow, red, orange, black-yellow |
Common Use | Bollards, posts, parking control, warehouse protection |
Applications
- Parking lot bollards around entrances, ramps, corners, payment areas, and restricted lanes.
- Warehouse protection posts near forklift routes, rack ends, loading bays, and pedestrian walkways.
- Road separation bollards used for lane guidance, vehicle approach warning, and temporary control areas.
- Reflective tape for metal posts in factories, service stations, logistics parks, and outdoor parking areas.
- PVC posts and HDPE bollard sleeves that need curved surface wrapping for clearer post marking.
- Guardrail posts, barrier posts, and tubular columns used in industrial safety zones.
- Re-taping work where old reflective bands are faded, scratched, peeling, or inconsistent.
- Narrow reflective tape rolls for slim columns where standard wide rolls are difficult to apply neatly.
Product Overview
This reflective tape is made for bollards and fixed posts that need stronger visual marking in parking lots, warehouses, logistics yards, road separation areas, and facility protection zones. In these places, posts are often installed at corners, entrances, forklift lanes, loading bays, or restricted access points. If the warning band is too dull or too narrow to notice at night, drivers may not recognize the post until they are already close to it.
Round and narrow posts also create practical installation problems. On curved steel posts, PVC traffic posts, HDPE bollard sleeves, and coated guardrail posts, ordinary wide reflective strips can wrinkle, overlap unevenly, or lift along the edge after outdoor exposure. This product uses flexible reflective film, controlled adhesive coating, and custom narrow slitting to help the tape sit more neatly on cylindrical surfaces.
For small parking control posts, 25 mm to 50 mm widths usually wrap better than wider bands because they create less side tension around the curve. On larger bollards, two reflective bands can be applied near the upper third of the post to improve low-light recognition from a vehicle. In internal sample wrapping tests on clean painted metal posts, 50 mm tape kept stable edge contact after 72 hours at room temperature when firm pressure was applied along both edges. Before installation, dust, oil, loose paint, rust powder, and moisture should be removed to help the adhesive contact the surface properly.
Benefits
- Improves night visibility for parking bollards, warehouse posts, road separation columns, and guardrail posts.
- Flexible film wraps round posts with less wrinkling than stiff reflective materials.
- Custom narrow slitting fits slim posts, recessed bollard cover grooves, and small-diameter PVC columns.
- Strong acrylic adhesive bonds well to clean metal, PVC, HDPE sleeves, and painted post surfaces.
- Helps refresh faded bollards without repainting or replacing the full post cover.
- In internal sample testing, peel adhesion reached about 12 N/25 mm on clean stainless steel after 24 hours.
- Supports consistent warning colors across parking lots, warehouses, loading areas, and vehicle routes.
- Available in black-yellow, yellow, white, red, and orange for different safety marking systems.
Where can reflective tape for bollards improve site visibility?
Reflective tape for parking posts is most useful in places where fixed columns can disappear into shadows, vehicle blind spots, or busy work zones. In parking areas, it can mark entrance bollards, light pole bases, corner posts, payment machine protection posts, and restricted access lanes. In warehouses, it helps identify rack-end posts, forklift route columns, dock door protection posts, and pedestrian guardrail posts. For old bollards with scratched paint or damaged warning bands, re-taping creates a cleaner visual band without removing the post. Using the same color and width across one site also helps drivers recognize protected areas more quickly from different approach angles.
Product Packaging
Product Loading
How should reflective tape wrap curved bollards and narrow posts?
Curved bollards and narrow posts need the tape width to match the post diameter. A slim post often works better with 25 mm or 50 mm slit rolls because the film can follow the curve without pulling too hard at the edges. During application, the surface should be cleaned and dried first, then the tape should be pressed from the center outward. On PVC and HDPE sleeves, extra pressure along both edges helps reduce lifting. Outdoor installation should avoid rain, condensation, dusty surfaces, and very cold conditions because the adhesive may not wet the surface evenly.
FAQ
Can this tape be used on metal bollards?
Yes. It is suitable for clean painted steel, galvanized metal, and stainless steel posts. For better adhesion, remove oil, rust powder, dust, and loose coating before wrapping.
Is it suitable for PVC posts and HDPE bollard covers?
Yes. It can be used on many PVC posts and HDPE sleeves, but sample testing is recommended because plastic surface energy and additives can affect bonding.
Can you slit narrow rolls for small posts?
Yes. Detectable Tech Company can produce custom slit widths for slim bollards, recessed grooves, guardrail posts, and parking control columns.
Is this the same as traffic sign reflective sheeting?
No. This product is designed for bollards, posts, parking control, warehouse protection, and curved surface wrapping, not flat traffic sign faces.